1 / 10
Charging stand for Garmin Epix 2 Pro / Fenix 7 Pro 47mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging stand for Garmin Epix 2 Pro / Fenix 7 Pro 47mm or similar models.
- Ocena
- 4,667 / 5
- Polubienia
- 62
- Pobrania
- 644
- Wydruki
- 5
- Wyświetlenia
- 2999
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 9)Remiksy (1)Kolekcje (87)Powiązane
I was struggling charging my watches and still be able to see / operate them. So I made this stand wich fits the original charging cable (slightly pressed in) - please check attached model dimensions to verify you have the same plug on the end…
Models included
- For original charging cable - depending on your printer, it press fits in or need to be secured by CA glue
- For non-original charging cable - it needs to be glued in
Both versions are in single and multicolor version
Print instructions
- 0.6 Nozzle
- 0.2 Layer
- PLA
- Supports - yes (I used break away supports, therefore 0 top clearance).