Paracord Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A convenient way to store and dispense 550 paracord.
- Ocena
- 5 / 5
- Polubienia
- 218
- Pobrania
- 943
- Wydruki
- 9
- Wyświetlenia
- 2404
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Update 24/02/2024: Updated the no handle version to include a reinforcement rib as testing showed it was susceptible to breaking if enough stress was applied. Old version has been moved to the Legacy folder.
Update 11/02/2024: Added a version without a handle.
After seeing and printing some other paracord winders out there, I designed one that would work better for me.
Has convenient holes to secure loose ends of the cord, a handle to better facilitate winding/unwinding, and a cutout that allows the end of the cord to come free once you've reached the end of your cord.
Image shows a 50ft/15m length of paracord wrapped on it. The second image is compared to @Phillip's Paracord Winder found here: https://www.printables.com/model/568697-paracord-winder
Printed on a BambuLabs X1C using PolySonic PLA with the following settings:
- 0.4mm nozzle
- 0.2 layer height
- 3 perimeters
- 20% Honeycomb infill
As printed, it uses roughly 37 grams of filament.