1 / 1
TwoTrees SK1 - 120mm Fan adapter for the Mainboard — zdjęcie 1

TwoTrees SK1 - 120mm Fan adapter for the Mainboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 120mm fan adapter for the Skipr Mini Mainboard using the original mountingpoints and magnets

Ocena
0 / 5
Polubienia
11
Pobrania
98
Wydruki
0
Wyświetlenia
818
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter for 120x15mm fan for the TwoTrees SK1. MCU Temp. dropped around 25°C

BASE RISER NECESSARY

One of the Parts can be used with magnets. If this is not desired you can either use tape to glue it to the frame or use the part to trace the mounting holes and drill trough the frame to use screws for mounting. 

Parts Needed

  • 120mmx15mm FAN, the standard ones are to high
  • 4x M3x20mm Flatheadscrew
  • 7-9 M3 Heatsetinserts
  • Up to 5 10x2mm Magnets

Tagi