PrintDry Pro Prusament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you own a [PrintDry Pro] (https://www.matterhackers.com/store/l/printdry-pro-filament-drying-system/sk/MSMLZFKZ)…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 3
- Wyświetlenia
- 342
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
If you own a [PrintDry Pro] (https://www.matterhackers.com/store/l/printdry-pro-filament-drying-system/sk/MSMLZFKZ) you probably discovered the included spool holders don't accommodate prusament spools (the smallest holder is too large). So here is one (you can print it in pretty much any filament) since there is no mechanical stress on these. I just used PLA (maybe HTPLA would be better in the heat?)
As always I included the STEP file for this who wish to edit it.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
150
Infill:
15% gyroid
Filament:
Prusament PLA PLA orange
Category: 3D Printer Accessories