LGX Mosquito Euclid probe mount for Railcore
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a early design for the Railcore using the LGX extruder with the Mosquito hotend and Euclid probe.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a early design for the Railcore using the LGX extruder with the Mosquito hotend and Euclid probe.
The .step file has been uploaded, so feel free to modify it as needed. My guess is that the euclid probe mount area will need to be strengthened for longevity. Edit: I haven't had any issues yet, but if I do I'll update.
I printed this in PC-CF at 100% infill with 6 walls as well as 6 top and bottom layers.
This model uses the following heatset insert sizes:
M2x2x3.2 - x2 quantity
M2.5x2.5x3.5 - x2 quantity
Here are where the M2.5 heatset inserts go. I used an M2.5x6mm screw to secure the Euclid probe board
Here is where the M2 heatset inserts go for the y-axis endstop
The offsets I used for the euclid prob are: X0 Y30.0 Z2.0
To get started, Duet forum's user “PaulHew” shared an incredibly useful .zip file with examples for your setup. https://forum.duet3d.com/post/267521