1 / 3
DIY Ice Spike Wheels & Tires for 12mm Hub RC Car
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a quick DIY solution for ice spikes for our RC cars to drive on the lake.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 223
- Wydruki
- 0
- Wyświetlenia
- 1089
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
All you need to assemble these is some glue to glue the wheel to the rim and 144 M2x10 bolts. I used Hex Socket Cap bolts but you could use pretty much any head type you wanted.
I'd suggest printing the wheel out of whatever you want and the tire out of TPU, but it would certainly still work if you printed the tire out of PLA/ABS/PET-G.