Clip-in Ikea Samla divider 5L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You have an Ikea Samla Box but want to put several things inside without them mixing? With this simple model, you can do
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 305
- Wydruki
- 4
- Wyświetlenia
- 1663
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome, If you enjoyed my model, please consider supporting me by sharing your make and leaving a like. For information, filament tests, and much more, all about 3D printing, feel free to check out my homepage or join my Filament Deal Channel. Check out my models :) |
You have an Ikea Samla Box but want to put several things inside without them mixing? With this simple model, you can do just that!
This Model is for the 5L Box.
The divider is designed in such a way that you can also put things on just one side without it tipping over. The clip with the partition can withstand vibrations, such as during transportation.
The installation is also very simple and quick, and the best part is that the lid fits on it effortlessly.
For each divider you'le need 2 clips!
Print-Settings
Material: PLA, PETG,… (as you wish)
Layer hight: 0.2mm will do the job.
Inflill: 10-20% is enough. If you want it to be a bit heavy go for 100%
Support: no
Brim: yes if you print the the clips Layer by Layer, no if you print it object by object
If your using an Bambu Printer:
In the uploaded profile, I used for the Clips object by object. Depending on how clean your nozzle is, the type of filament you use, and the print bed you have, the clips may come off. Printing with the "Object by Object" setting works quite well in preventing this issue. If youre using a X1C, I recommend to disable the option “First Layer Inspection” for the clip. You can do so directly in Bambu Studio (Device Tab):
Trivia: The number on the Plate is a reference to the Lego Element 96874 aka Brick Separator. I designed this, to separate lager amounts of bricks inside a Samla box.
Share your makes and support me
If you like my work, you can support me here, via Ko-Fi or Patreon. Please leave a comment or share your makes 😁
If your interested in selling the printed models DM me.