TIG Filler Wire Tube holder bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bracket to hold 2 of the Blue Demon TIG welding wire holders.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this to put on the wall next to my welding table. I used 2 #10 2.5" screws to hold it in place. My garage is mostly brick, if you have a typical stick built garage, I would recommend putting on on a stud, and the other using a heavy duty drywall screw assembly. I haven't put a full 20 lbs on mine yet. I printed at 30% infill to help make it a bit stronger.
I bought the tubes from amazon. I bought the pink ones as they were almost 50% off.
https://www.amazon.com/dp/B084ZR553K?ref=ppx_yo2ov_dt_b_product_details&th=1