Camera 10in Ring Light Tripod Mount For Velbon S-6000 Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printed parts that connect the light to the camera to the mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of printed parts for connecting a 10in ring light i purchased from ebay to the bottom of my DSLR camera witch then connects to the quick disconnect of the Velbon S-6000 tripod i had keeping the light mostly infront of the camera while syncing adjustments between the two. I used a old piece of copper pipe i had on hand hold it but any 16mm OD pipe or dowel of should work. The part on the pipe holding the light is connected via a dovetail joint to the plate attached to the camera that rests on the tripod head allowing you to remove your change the light without removing the adapterplate from the camera body. A .step file has been included for any ho wish to modify this design to suit their needs. you should be able to split the connection between the camera and the pipe on the pipe side in order to make it work with almost any size of ring light.
Print Tested in Black Printbed PLA using included settings in the 3mf file.