40mm Compact Blast Gate for a dust extraction shop vac system (version 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 40mm blastgate designed to be as compact as possible and wall mountable, with no supports and minimal hardware
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 298
- Wydruki
- 1
- Wyświetlenia
- 2436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I looked around for a 40mm blastgate design to use in a dust extraction system. I found a couple but all of them were pretty big and stuck out from the pipe a fair distance, they also required alot of hardware to make them work.
I made this to be ultra compact, no hardware needed and wall mountable.
Its depth is aligned to the pvc 40mm pipe brackets, so no additional packing or adjustment is required to mount it on the pipe run.
The model is a revised version 2, removing the hardware requirement and changing the blast shield to a vertical slot
I have included several other models also used in this dust extraction install:
40mm end cap
Wall mount pvc to vac tube mount point
Wall mount vac tube end cap
50mm cyclone to 38mm vac tube adapter
Dust guide for the 40mm/shopvac tube wall mount (optional based on the type of material you're vacuuming)
Nothing needs supports to function, however i did supply the blastgate as gcode/3mf with the support enforcers and orientation needed to make support detatchment as good as possible, i opted to print this part with supports.