Flsun Q5 Universal v6 Effector Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of 'Flsun Q5 Universal v6 Effector Remix' to be more rigid
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 525
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reccomend printing in ABS/ASA or any other heat resistant and stiff material
0.2 layer height
50% infill (cubic or gyroid)
4-5 walls (can also add alternate extra wall for added stiffness)
Requires 6xM3 heat inserts for connections to carbon rods
Also reccomend glueing together the baseplate and the v6 cage with acetone or polycement for added part rigidity. Use M3 screws loosely inserted from underside for alignment while glue is drying.
This is just for the effector base plate, please see original model on thingiverse for rest of effector toolhead (E3Dv6 cage and fan ducts etc). https://www.thingiverse.com/thing:4979221
Tollerances for 40mm heat sink fan and two 4010 blower fan can be a little tight, you may need to file edges of fans down a little bit
Also reccomend doing a trial print at lower infill and walls to test tollerances and fit, especially for M3 heat inserts. Depending on your printer setup ABS/ASA can shrink different amounts.
.step and .f3d files are included should you need to make any adjustments
See model for sherpa mini mount to convert to direct drive >> https://www.printables.com/model/759031-sherpa-mini-mount-for-flsun-q5-universal-v6-effect