Tube cutter guide for werner_rh cheap drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple tube cutter guide/helper for cutting tubes (10 mm diameter) to 81 mm length for a dry box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 415
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a few dry boxes from werner_rh design https://www.printables.com/model/634289-filament-dry-box-cheap-and-simple and this model is a little helper/aid for making tubes for dry boxes easily and precisely.
Its a super simple shape to hold 10 mm aluminum tube as proposed in the original concept and help to cut it to 81 mm length.
Created in Tinkercard - original file is here https://www.tinkercad.com/things/fOdGJEqbG62-wernerrh-drybox-tube-cutter-helper if you would like to adjust it somehow.
The concept is simple - little lower cutout is for clamp to hold the tube, second clamp additionally holds the whole guide. I have cut about 10 of tubes with mine 1 of 1 first edition printed in transparent PLA without problems - my experience is, that the best way is to rotate the tube 3-4 times and not to cut directly to the bottom.