Estes Rocket Launch Control station for Pelican 1120
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Panel slides into Pelican 1120 to create a platform for switches, LEDs, etc and creates a launch station for estes rocke
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 714
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Panel snugly fits into a pelican 1120 case.
Small rechargeable battery pack underneath (held in place with 3m double sided adhesive)/ I remove the panel to recharge.
Key arms the box and turns on the green LED. The Key also has the LaunchPad safety cover. Makes sure the key isn't in the box while you set up the launchpad. Safety 3rd.
Middle red toggle switch arms the “Engine Start” button
“Engine Start” button has an ignitor check - LED on = good connection, LED off = not connected
Engine Start button - https://www.amazon.com/gp/product/B099951TY2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Keyed Switch
https://www.amazon.com/gp/product/B07H28S1ZM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Lighted Safety Toggle Switch
https://www.amazon.com/gp/product/B07T6XJF1T/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I had a small green LED lying around, but not sure where I purchased it.
Wiring came from the basic launch controller that comes with the cheapy estes launchpad.
The battery pack was one I grabbed that had 4 cells, and match the stock cheapy estes controller for voltage.