1 / 2
Quest 3 Lens Frames for Pico 4 Lenses (VR Optician) — zdjęcie 1
1 / 2

Quest 3 Lens Frames for Pico 4 Lenses (VR Optician)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to use Pico 4 lenses from VR Optician on a Meta Quest 3

Ocena
0 / 5
Polubienia
9
Pobrania
157
Wydruki
0
Wyświetlenia
1092
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an adapter to use existing Pico 4 lenses from VR Optician on a Quest 3 VR headset.

After printing I had to carefully cut away some blobs on the outer side part that clicks inside the lens frame of the headset to make it fit.

Be careful when installing them, the bottom part snaps off very easily.

Print parameters

  • Layer Height: as small as possible (I used 0.1mm)
  • Infill: 15%
  • Supports: needed
  • Detect Thin Walls: enable if nozzle > 0.2mm
  • Material: PETG recommended (PLA and ASA didn't work well)

EDIT: After having to reprint the v1 over and over again because it kept breaking I made small adjustments to hopefully increase the rigidity of the thin parts. I also added fillets to allow a better grip when removing the lenses.

Tagi