Havsta ikea door slide mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modification to allow easier cleaning of sliding doors on ikea havsta doors
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
printed with the arc up, I used supports but it can easily print without. This simple mod to the top latches for ikea havsta sliding doors makes them spring loaded.
I used springs that are 304 stainless steel with a 6.5mm OD, 15mm tall and made from 0.56mm wire. Got them off ebay somewhere but those are the specs.
This mod requires two cuts with nippers indicated by the red lines in one of the pics. Otherwise its a simple pressure fit and seems to work great.
the install is same as the original instructions on pg24 here (https://www.ikea.com/us/en/assembly_instructions/havsta-glass-door-cabinet-gray__AA-2092424-6-2.pdf)