GoPro/Garmin style light mount - Old Man Mountain Elkhorn and Wald 137
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light mount meant to put a garmin/gopro mounted light on a specific rack with a specific basket
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 709
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fits the front holes on an OMM Elkhorn rack, with clearance for a Wald 137 basket. Added bonus of holding the basket in place.
5mm screws and nylock nuts. I didn't bury them completely flush into the model, partially to make sure there was extra meat on the gopro mount, partially because the one long M5 screw I had was a little too long.
F360 file included that should be moderately easy to tweak if you have any particular needs. I was a little sloppy in parametric-terms, but it's not too bad.
I printed it completely solid (all walls). PLA should be just fine unless you live in Phoenix. PETG or ABS are also great options. I did mine in CF PETG because why not.
Mild support potentially helpful on the curved overhang, especially if printed in ABS or PETG.