Elegoo Neptune 3 (Pro / Plus / Max) Beacon Normal Profile Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip to attach Normal Profile Beacons to the Neptune 3 series 3D Printers
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 995
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU Lesser General Public License
Description from original models Page
This should allow you to remove the stock magnetic ABL sensor and replace it with a Beacon (low-profile Rev D) using existing holes in the stock housing and screw in the optimal position.
I'm not sure if it will work with other models, but it should provide the mounting platform to make modifications from.
You'll need two M3 brass heat set inserts.
Recommend printing as pictured with regular supports on build plate only (or really good bridging ability).
This is an edit of the Elegoo Neptune 3 (Pro / Plus / Max) Beacon Mount by EWJ2I, making it compatible with normal profile Beacons. I made this with my Normal Profile revH in mind, I don't know if it will work with any other models, but it theoretically work with any normal profile Beacons since the hole spacing is the same. For low profile beacons, use the original part this is remixed from.
You will still need the two screws, and need to print with supports or a good bridging printer.