Massage gun head - rolling ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The attachment is compatible with popular massage guns.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 1206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
Model Description:
The attachment is compatible with popular massage guns. When the attachment is not applied to the body, it makes a bit of noise, but it glides smoothly over the skin compared to a regular round attachment.
File Description:
I have sent two STL files with two ball-to-pocket distances, 0.3mm and 0.4mm, as well as a FreeCAD model file.
Print Description:
I personally printed the 0.4mm version in PLA with supports, 25% infill. Print time was 1 hour and 12 minutes, material consumption was 33g.
Reflections After Printing:
It printed nicely as a whole; I removed the rubber band from another unused attachment. The ball from the bottom could be smoothed a bit with sandpaper (at least in my case with 0.4mm). The 0.4mm clearance is noticeable by the fluttering sound when the attachment is in the air.