1 / 8
Steering wheel knob ball (billiard No.8) / koule na volant — zdjęcie 1
1 / 8

Steering wheel knob ball (billiard No.8) / koule na volant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Steering wheel knob ball (billiard 8)

Ocena
5 / 5
Polubienia
18
Pobrania
132
Wydruki
0
Wyświetlenia
1206
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This stearing wheel knob is designed for stearing whell with outher diameter 365mm and 25mm diam in cut.

The clamp is printable as a one piece, situated on plate according picture. The ball with pivot is printable on place also. Gap is 0.2mm in both case. 

The lid (number 8) is designed for MMU unit.

For assembly you will need Bolt M8, 2 shims (under nut and under ball) and one M8 nut.

 

I recommend use PETG or ABS, 0.2 layer, 40% infil.

Tagi