1 / 1
Compact Bass Shaker mount for VNM Pedals lite — zdjęcie 1

Compact Bass Shaker mount for VNM Pedals lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter to mount a Rockwood compact bassshaker to the VNM lite pedals

Ocena
0 / 5
Polubienia
2
Pobrania
34
Wydruki
0
Wyświetlenia
449
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This mount may also work with the big VNM pedals, because they are essentially the same kit, just different materials and bigger face plates.

I used this small bodyshaker, which you can get for around 18-20€: https://www.amazon.de/dp/B06Y19TZKB?psc=1&ref=ppx_yo2ov_dt_b_product_details&language=en_GB

And connected it via a cheap 10€ USB amplifier: https://www.amazon.de/dp/B09KN343S4?psc=1&ref=ppx_yo2ov_dt_b_product_details

You will also need a power supply, I just connected it to the same as my other bass shakers, a cheap 150W 12V power supply. Though for safety reasons, only use those, if you know what you are doing :)

Depending on your setup you can also skip the amplifier or the power supply of course.

Everything is setup via SimHub:

https://github.com/SHWotever/SimHub/wiki/ShakeIt-V3-Bass-Shakers---Audio-Output-Configuration

Be aware that the feeling with the default settings is pretty bad, so you have to dial in settings you like, a good starting point for ABS and wheel lock effects for me was a frequency of 20-30Hz.

Tagi