Da Vinci Pro 1.0 feeder clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part upgrade: in-feed for the XYZprinting da vinci 1.0 pro
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The in-feed for the XYZprinting da vinci 1.0 pro is not exactly optimal, as it will quickly get worn when using third party filaments, because of the angle at which the filament is fed.
With this I wanted to replace the small clip, and use a feeding tube. You can also just print the part and not mount the tube, depending on what you prefer.
This is definitely a welcome upgrade to my da vinci pro 1.0.
Let me know if you find this useful, and make sure to post pics of your makes!
Print Settings
Printer:
XYZprinting da Vinci 1.0 PRO 3-in-1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
250 microns
Infill:
20%
Notes:
Originally I posted this on Thingiverse: https://www.thingiverse.com/thing:2489619
Consider printing it standing upright, with support material.
This will make the clip function strongest.
How I Designed This
Made by manually measuring the original part, and recreating it in Fusion 360.