Apple Vision Pro Cross Belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cross belt system for Apple Vision Pro to significantly enhance ergonomics using Solo Knit Band
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 221
- Wydruki
- 0
- Wyświetlenia
- 1965
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Virtual Reality
- Licencja
- Creative Commons — Attribution — Noncommercial
With these clips, you'll be able to add a fastening system using a cross strap that goes across your head and improve the ergonomics of the Apple Vision Pro with the Solo Knit Band system without sacrificing aesthetics.
There are 3 different files:
Standard Clip: You'll simply need some velcro straps with a maximum diameter of 30mm.
Clip for PICO 4 belt: If you have a PICO 4, you can use the upper belt (gray) to anchor it, achieving a much more aesthetic look.
Buckle to hold the strap, you can print as many as you need.
INSTALLATION
The installation is very simple, just remove the Solo Knit Band as indicated in the manual, slide the clips you have printed onto the side fins of the Apple Vision Pro, and then place the Solo Knit Band back on.
Then simply insert the upper strap and the buckles you have printed.