Omnifixo Pinecil Case Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pinecil/Omnifixo case with space for solder and brass sponge
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 1576
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I love the case PosterBored made, but when I went to use it for the first time I realized I really needed a brass sponge, and would like an extra tip available on the go. I also wanted a larger hole to put my solder roll in. So I've added all those things to the model. All you'll need to complete the case is 2 10mm diameter x 15mm long magnets (or stacks of shorter magnets as I've used).Superglue them in and wait for it to dry and you're all set.
I printed mine in PLA, with a .6mm nozzle, .3mm layer height, 15% infill, 3 perimeters and 5 top/bottom layers. I'm sure pretty much any other settings or materials will work just fine.