1 / 1
Adapter to connect a hose to a thread G1/2 - ⌀ 7mm up to ⌀11mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To connect a hose to a thread G1/2, I have designed this adapter with ⌀7mm up to ⌀11mm (0,5mm steps)
- Ocena
- 0 / 5
- Polubienia
- 115
- Pobrania
- 429
- Wydruki
- 0
- Wyświetlenia
- 2072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (154)Powiązane
The adapter is designed to connect a hose to a thread G1/2".
Available diameter for hose: 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11mm
Print instruction:
- material: PETG
- layer height: 0,2mm (0,3mm)
- nozzle: 0,6mm (0,4mm)
- support: no
- enclosure: not required
Note:
All adapter are in one .stl file (left: ⌀7mm; right: ⌀11mm)