Scuba diving wing hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple minimalistic hanger for a backplate/wing or jacket style BCD.
- Ocena
- 5 / 5
- Polubienia
- 131
- Pobrania
- 816
- Wydruki
- 6
- Wyświetlenia
- 3061
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to hang our new wings somehow and wanted it quickly, preferrably right now. 3D printing to the rescue!
Printed using PETG, 0.2mm layer height and 4 perimeters for added strength. Infill probably does not matter too much. I usually use around 20% grid. It is plenty strong for the wing with 3kg backplate.
The photos are of the first version. Later I made the center hole bigger, so it does not pinch your finger, when you hold it by the hole.
UPDATE: added two new versions with slightly larger hook diameter.
UPDATE 2: added long-arm versions of the hanger. Suitable for BCDs with wider shoulder straps up to 100mm (the original arms are 60mm long)