Scuba diving wing hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple minimalistic hanger for a backplate/wing or jacket style BCD.
- Rating
- 5 / 5
- Likes
- 131
- Downloads
- 816
- Makes
- 6
- Views
- 3,061
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Share Alike
I needed to hang our new wings somehow and wanted it quickly, preferrably right now. 3D printing to the rescue!
Printed using PETG, 0.2mm layer height and 4 perimeters for added strength. Infill probably does not matter too much. I usually use around 20% grid. It is plenty strong for the wing with 3kg backplate.
The photos are of the first version. Later I made the center hole bigger, so it does not pinch your finger, when you hold it by the hole.
UPDATE: added two new versions with slightly larger hook diameter.
UPDATE 2: added long-arm versions of the hanger. Suitable for BCDs with wider shoulder straps up to 100mm (the original arms are 60mm long)