Nest Protect V2 EU Junction Box Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suitable for EU ceiling or wall junction boxes with a screw distance of 55mm to 65mm.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
This is a remix of the excellent model by @BobdeBouwer_481949. Credits go to him!
I moved into a house with ceiling junction boxes for smoke detectors, but I had already invested in battery-powered Nest Protect V2s. I looked everywhere for a mount model that would fit my circular junction boxes, but no models allowed for the required screw distance of 60mm.
This model should fit junction boxes with a screw distance of 55mm to 65mm. You can use the original Nest screws, M4 ceiling box bolts or M3 wall box bolts with a washer.
Printing Advice:
Print with supports, e.g. with support enforcers for the screw holes.
Since this is a structural part, print with a decent amount of walls and infill.
Also, since the part might be used around electrical wiring (which may produce heat), it might be good to print with a heat-resistant material, e.g. PETG or ABS.