1 / 4
MATEK F405 Wing v2 bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
bracket for Matek F405 WING V2 flight controller
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 272
- Wydruki
- 0
- Wyświetlenia
- 941
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Since I did not find a suitable bracket which was sturdy enough and did not interfere with the wiring, i designed my own.
- It can be printed without supports.
- The top plate has an opening for the build-in LED light and a few cutouts in the bottom for the tiny screws which hold the FC together. The topplate does not push against these.
It was designed for the MATEK F405-WING-V2
It requires brass inserts (M3x5x5mm, M3) and a few M3 bolts (M3X 6 f.e.) :
Picture of the mounting holes are included, but the bracket itself could be glued into the aircraft as well.