C922 Webcam mount for Ender 3 S1 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I could not find a good enough webcam mount for either my webcam or the printer I am using so I made my own.
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I could not find a good enough webcam mount for either my webcam or the printer I am using so I made my own. it mounts on the right side of the printer head bar. There is also a hole for a screw in the print just if you would need to secure it more tightly.
The screw I used is not made by me you can find it here: https://www.thingiverse.com/thing:3160367
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20% minimum
Filament: Creality3D PLA+ I used grey
Notes:
Make sure that you add a support blocker on the bridge between the "legs" or it will break off when you are taking off the supports. though that bridge is just aestetic serves no purpose. I used 15% infill with 8mm infill line distance but I would suggest using at least 20% infill
Category: 3D Printer Accessories