1 / 6
Atomstack A20 X20 Controller Plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back plate for the Atomstack Lasers Control Box with Wi-Fi module
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v2.0
Atomstack A20 (X20, S20) Pro Controller Back Plate
This is a modification to the original model to continue using the Wi-Fi antenna.
You can place the antenna in two orientations.
It isn't the most elegant, I was going for functional, design but it is a quick print and fits well.
Print:
1x Wi-Fi Mount
1x Mount Plate
Assembly:
- Put some superglue in the recess you are going to use.
- Place the Wi-Fi mount into the recess.
- Ensure the Wi-Fi cable fits into the groove.
- Mount to the controller using the original 4 black screws with the mount on the inside.
Mounting:
4x 3mmx16mm wood screws
The tolerances are 0.1mm all round so you might need to file corners down depending on your printer tolerances. Use a spot of super glue to hold in place.
Files are oriented in intended print orientation.
Enjoy, cheers