1 / 6
Atomstack A20 X20 Controller Plate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Back plate for the Atomstack Lasers Control Box with Wi-Fi module
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 33
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Atomstack A20 (X20, S20) Pro Controller Back Plate
This is a modification to the original model to continue using the Wi-Fi antenna.
You can place the antenna in two orientations.
It isn't the most elegant, I was going for functional, design but it is a quick print and fits well.
Print:
1x Wi-Fi Mount
1x Mount Plate
Assembly:
- Put some superglue in the recess you are going to use.
- Place the Wi-Fi mount into the recess.
- Ensure the Wi-Fi cable fits into the groove.
- Mount to the controller using the original 4 black screws with the mount on the inside.
Mounting:
4x 3mmx16mm wood screws
The tolerances are 0.1mm all round so you might need to file corners down depending on your printer tolerances. Use a spot of super glue to hold in place.
Files are oriented in intended print orientation.
Enjoy, cheers