1 / 2
Dewalt table saw to 1 7/8 inch shop vac hose
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for a dewalt table saw to an 1 7/8 inch hose from a rigid shop vac
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 270
- Wydruki
- 2
- Wyświetlenia
- 1324
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (135)Powiązane
This is an adapter that I made for a Dewalt DWE7480 table saw to a shop vac, It was designed for the Rigid WD5500 shop vac, but it should work with any shop vac with a 1 7/8 inch hose. It may require a little sanding to fit properly, but your experience may vary.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3 mm layer height
Infill:
5%
Filament:
Silver Prusa PLA