Parametric spool rack for Ikea Kallax shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric spool rack or spool holder to add on your Ikea Kallax shelf
- Ocena
- 4,5 / 5
- Polubienia
- 52
- Pobrania
- 98
- Wydruki
- 3
- Wyświetlenia
- 1952
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for an efficient storage system for my apartment to go with my Kallax shelf.
I found nothing suiting my needs so I designed this spool holder or rack. It can be used as a spool storage rack or as a spool holder to unwind filament to your printer
It goes on top of an Ikea Kallax shelf and uses the existing screws and holes so no need so sacrifice it.
I went with a 16mm electric pipe to hold the spools.
Mounting :
Just cut a length of pipe equal to the depth of the shelf and put it through the round holes of the brackets.
Unscrew the top screws of a side , insert the brackets and put back the screws with the added brackets
List of components :
16mm electric pipe or any rod you want to use (make sure to adapt the parameter to the diameter you use)
2 brackets (to print)