1 / 2
Zebra 3D stripe art for IKEA Sannahed — zdjęcie 1
1 / 2

Zebra 3D stripe art for IKEA Sannahed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D stripe art. Fits IKEA Sannahed, but can be scaled for other frames.

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the second part in my WIP series of 3D art for the inexpensive IKEA Sannahed frames. 

Do you like 3-dimensional art that interacts with the light? Do you like zebras? This is the model for you. 

I printed the individual segments upright in vase mode. PLA white and PLA CF. 0.3mm layer height, 0.6 mm nozzle. Smaller layers will look better if you get close to the picture. Total weight 180 g. Brim required. 

Then I just taped the pieces together. The frame constrains them pretty well, so a bit of tape is really enough. 

File names: 

You can probably also print all segments with the same color together with 1 or 2 perimeters and very little to no infill. Make sure to use a generous brim to avoid the parts falling over. 

I also included a file for multi-material print. I didnt't use it on my Bambu because it would generate a huge amount of poop, almost 700 grams! Only use this with a MMU or similar if you don't hate zebras. 

You can customize this model in OnShape. 

 

Tagi