Paleo Boardgame card organiser (<18cm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card organiser for the board game Paleo small enough to be printed on the PrusaMini (with and without expansion cards).
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 762
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Card holder for Paleo cards.
The base game includes 1-5 and A-J. The original model by Andun_HH did not fit on my PrusaMini print bed, so I changed it up (while also reducing overall volume and making labels easier to read):
basic_1-5_A-J - this version really only holds the base game cards in use (spares have no slot in here). I added small holes on the left side, for a potential future expansion box to be able to lock-in with.
basic_1-7_A-J - this version has two spare slots for spare cards included in the base game, but these can also already act for the expansion (which includes only the extra numbers 6 and 7; I have not made an additional model for the extra letters yet, as I do not yet have the expansion myself). So if you are like me and like all the numbers together, I recommend this version. :)
Print instructions:
Print without supports. Printed with 0.3mm and 0.6mm nozzle in PLA. I recommend adding a height modifier for 0.2mm layer height for the top layers including the labels (letters and numbers) or printing it all with 0.2mm if you have the time.