Paleo Boardgame card organiser (<18cm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€7.03 – €8.59 net (excluding VAT)
For file: Paleo_CardOrganiser_basic__1-7_A-J_0.6n_0.3mm_PLA_MINI_5h53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.81 excluding VAT (range midpoint).
- Weight reported by the author
- 138 g
- Print time reported by the author
- 5.88 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Card organiser for the board game Paleo small enough to be printed on the PrusaMini (with and without expansion cards).
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 0
- Views
- 762
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Card holder for Paleo cards.
The base game includes 1-5 and A-J. The original model by Andun_HH did not fit on my PrusaMini print bed, so I changed it up (while also reducing overall volume and making labels easier to read):
basic_1-5_A-J - this version really only holds the base game cards in use (spares have no slot in here). I added small holes on the left side, for a potential future expansion box to be able to lock-in with.
basic_1-7_A-J - this version has two spare slots for spare cards included in the base game, but these can also already act for the expansion (which includes only the extra numbers 6 and 7; I have not made an additional model for the extra letters yet, as I do not yet have the expansion myself). So if you are like me and like all the numbers together, I recommend this version. :)
Print instructions:
Print without supports. Printed with 0.3mm and 0.6mm nozzle in PLA. I recommend adding a height modifier for 0.2mm layer height for the top layers including the labels (letters and numbers) or printing it all with 0.2mm if you have the time.