Andis Part Replacement T-Guide Fits Outliner, T-Outliner, GTO/GO Part #04116
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Andis Outliner/GTO/GO T-Guide that aligns the oscillating blade.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the Andis Outliner T-Guide that aligns the oscillating blade.
I have the T-Outliner, but it should work for the GTO/GO and Outliner. I tested it and it works perfectly.
First layer adhesion is critical for this. It is a very thin part (about 0.6mm). I have not built in any tolerance so you may need to do some contour compensation in the slicer depending on your printer.
I hope you find this useful!
Notes:
Print with PETG or ABS. PLA is too rigid and will likely crack.
- Resolution: 0.12 (Print at smallest layer height you can do)
- Infill: 100%
- Use 3 - 4 walls
- Print on a smooth bed
- If you have issues with layer adhesion use mouse ears on the corners
You want the smooth side of the guide facing the blade that oscillates.