1 / 1
Andis Part Replacement T-Guide Fits Outliner, T-Outliner, GTO/GO Part #04116
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Andis Outliner/GTO/GO T-Guide that aligns the oscillating blade.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is the Andis Outliner T-Guide that aligns the oscillating blade.
I have the T-Outliner, but it should work for the GTO/GO and Outliner. I tested it and it works perfectly.
First layer adhesion is critical for this. It is a very thin part (about 0.6mm). I have not built in any tolerance so you may need to do some contour compensation in the slicer depending on your printer.
I hope you find this useful!
Notes:
Print with PETG or ABS. PLA is too rigid and will likely crack.
- Resolution: 0.12 (Print at smallest layer height you can do)
- Infill: 100%
- Use 3 - 4 walls
- Print on a smooth bed
- If you have issues with layer adhesion use mouse ears on the corners
You want the smooth side of the guide facing the blade that oscillates.