Counting matching models…
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
This organizer will hold twelve Oster Andis or Wahl clipper blades or guards. When using PLA I got significant warping on the corners even with a skirt, so I printed using ColorFabb CF PETG, which meant I had to print it very slowly (12…
SanDisk SSD drive mounting gadget with 25mm Mini Suction Cups, you need to purchase the Mini Suction cups from Amazon or anywhere else that has the same dimensions here is the link where I got mine AMAZON - print with support. - 15%…
This is the first prototype of a 3D-printed filament holder designed for mounting on Skandis perforated boards. The model consists of interlocking parts, including a main bracket, a spool mount, and a locking clip. The design allows for…
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
I made this case for my friend who had a Cruzer Blade pen drive with a broken case and wanted to fix it, but I pushed it further by adding his name initials, capacity and an awesome glowing orange Pikachu logo on the back. Behind the…
This model is a replacement casing for a USB-A SanDisk Ultra-Fit. This holds the tiny circuit board. The tight fit allows this case to be used without glue. The Fusion 360 parametric model is included if your printer requires different…
If you have this flash drive with broken slider, you can make simple case and continue of use it. PETG, 2 perimeters.
Simple holder for 1TB SSDs using the Gridfinity system by Zack Freedman . Fits up to 3 SanDisk Extreme SSDs for all your storage needs. Leave any suggestions below. Thanks!
Instead of having a bunch SSDs piled up on my work desk, I made this little storage tray to hold them tidily. It will hold 5 drives of varying sizes, there's a Sandisk Extreme & Extreme Pro in the photo with storage from 500gb to 2tb.…
Please print with 6 wall loops, don't be shy with plastic, this is a case, it needs to be strong. Print it like on the last picture, this is the best way. Supports are very easy to remove, don't be afraid using them. I didn't found the…
I have designed this model based on byron.seven's design. you need to buy these (20mm): https://shorturl.at/clq48
Ikea Skandis Allen Key Holder for 1,5mm to 5mm.
Just a simple case for a Sandisk Cruzer U thumbdrive. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Filament: Prusa Filament PLA Silver Category: Computer
A replacement housing for Sandisk full sized SD card with the short 10mm long chip. The dummy chip is also included in the model. The intention of this was to create a housing to allow a card to be read and the data recovered, rather that…
A small hub to hold up to 5 SanDisk SSD's
Remixed to fit the older SDSSDE60 version
Remix of the SSD Holder from @giostealth, but with only one place for the SSD and one bigger part for storage. Printed with PLA at 0,16mm, but 0,2 will work just fine. note: newer models of the SanDisk SSDs have bigger dimensions, so you…
This is a SSD holder for the portable SanDisk Extreme SSDs which on the back has space for a velcro strap. As I sometimes tend to work during commuting and I don't want to have the SSD just hanging there this enables me to just always…
Eine messchieber Halterung für ein skandier regal
Simple print, looks great, should be printed in multiple colours, the chip clips in great and to get it, simply snap open the original sandisk case and pull out the USB part of it and then slide it into place in its new home, should take…
This is a complete redesign of this great concept with a added exposed port for the cable and a slight fit change.
The original case didn't work properly. Every time I tried to stick the drive into an USB slot, it moved backt into its case, because the latch wasn't strong enough. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2…
A spare part for repairing SanDisk Cruzer Ultra USB stick. Parts are simply plugged together.
Generally, there are two types of media that can be used with the Ninja V and other Atomos recorders using a similar caddy design - expensive AtomX drives that fit nicely in the slot and inexpensive caddies which accept a SATA SSD, but…
I bought this clipper and i couldn't find a compatible short haired clipper guide. this worked
Hello, This is a Ikea Skandis Pedgeboard Mount for the Radiomaster Zorro. It snaps in with a click and is simple to print without supports.
This is a cover for the USB-C part of the SanDisk DualDrive o USB Type-C. It has a tight fit and thus a good hold that prevents it from falling off by itself. Use at a risk. Exclusion of liability for any damage or injury.
These are models I designed to mount one or two Sandisk Extreme Portable SSDs to a vertical surface (ex. back of iMac). I used 3M Command Strips to safely and cleanly attach the mount to the back of my iMac. The same method can be used to…
Here's a case for your Sandisk Extreme Portable USB-C SSD. I wanted a case that was a little bit of protection, without adding too much bulk. It has 2mm walls. I've tested with 25% infill and with 100%. Since it's so compact, I'd…
I made this so you can insert the usb drive into the tpu holster and easily remove it for use. With this the USB drive is not attached directly to your keys and your keychain doesn't weigh on the usb port risking breaking it. Sandisk logo…
Box for 2 SandDisk Extreme SSD and accessorise (usb cord and USB 3 adapter). I added a space also for a microSD to SD adapter. My disks are 500GB and 1TB so one part is a little bit smaller. Remix Is permitted to feed any needs. Do you…
Hello i have designed a pen holder for 3 pens for the Skandis pegboard. The 3 tubes are 40mm in lenght and have a 10mm inner diameter. I havent found a penholder for the pegboard that features so small pens. I printed in with 20% infill…
Easy to print model, designed for 32gb Sandisk Cruzer Blade USB but would probably work with the other storage sizes too. The chip comes from the inside of the two halves of the original sandisk case and clips into the new 3d printed one.…
This is my mount for the I fix it, Murray, precision bedside. The Malte is designed to fit on to the ikea ska dis system. You will need support structures to print it, but I highly recommend using organic support. if you print it please…
Case for Sandisk Extreme Portable to protect and carry usb cables with it.
My first upload! A tabletop rack to hold SanDisk Extreme SSD devices.
This is a very easy and quick to print hook for the Ikea Skandis Pedgeboard. It was created to fix my ImpulseRC Apex 5 and 3 inch drones to this pedgeboard. The hook will stay under the camera. The distance was chosen so the drone…
Here is a box to protect the Sandisk Ultra USB key. Basically I had modeled the double version in order to ensure that my two keys were always together, but I decided to make a single version. The box is sober and simple, with a magnetic…
This is a mount for the sandisk extreme external ssd. I Used it to mount the ssd to my Desk.
Zur besseren Ordnung meiner SanDisk Extrem-Flashspeicher und dem USB-C Hub habe ich dieses Modell erstellt. Es kann ohne Support gedruckt werden. Es wurde folgender USB-C-Hub verwendet:…
This is a replacement case for the Sandisk Ultra Dual Drive Go as the original plastic shell degrades after prolonged use. For a longer life increase the layer adhesion by bumping the temp. For better results print in ABS or PETG. Please…
Personally made unofficial model made for: Sandisk Ultra Dual Type-C USB
material: TPU 100% infill SANDISK Portable SSD - USB 3.2 Gen 2 Festplatte, 2 TB or 1TB
Remixed holder of Sandisk SSD to fit on your Skadis board. Print instructions You are going to need Skadis Hook with Dovetail which slides into pockets on back of the holder. Gcode for PLA included in the files.
Printed in PETG but PLA is fine also I assume.
1x3 2u bin for a SanDisck External SSD. Slot size is 99mm x 10mm.
Attaches to a #10, 1.5mm metal guard. Includes both 6mm and 3mm variations of the friction fit guard. Print with brim! Supports are optional. I painted them on in Prusa Slicer on the left and right edge of the incline, printed with the…
I really didnt like the existig one with the calbe stuffed in so i designed a new one :) fell free to remix etc.
This rack design has been updated to include a small pegboard on the inside of the cupboard door, which offers much more stability. Additionally, I've created a Fusion360 standoff to secure the pegboard to the door. You can find those…
Replacment sandisk ultra usb 3.0 flash drive housing Print Settings Printer Brand: RepRap Printer: p3steel Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.26 Infill: 100% Category: Replacement Parts
Resized to work with SDSSDE60 version of the drive.
Case for SANDISK Ultra Dual Drive Go
Hey there! This a box/mount to store my SanDisk Extreme Portable SSD mounted on a vertical part of a shelf. It was designed to clamp onto a vertical part of a shelf with a width of 16mm, but you can edit the step file to tune it for other…
SanDisk SSD Protective Case with cable and USB adapter storage. Designed for SanDisk Model: SDSSDE61 Tested and Fits: 1 TB & 2 TB SSD The SSD slides into the protective cover and is held in firmly by a friction fit. The slide-on cover…
This is a simple little print that I found very useful for keeping the USB adapter and cable organised/together with the SSD. I printed this in Overture TPU. It prints in under 20 minutes in TPU. It prints in under 10 mins in PLA/PETG.…
Instead of a broken one
Got tired of the cable bulk so I got a male to male usb c adapter and made two kinds of braces for the SanDisk Extreme Portable SSD. Mostly for when I'm connecting it to my laptop. One brace is just for the usb c adapter the other brace…
You will need support for this print, and I recommend okay leg supports/tree support. If you printed, please consider posting to make!
A mount to use for hanging an angle grinder on Ikea_Skandis board
Introducing the ultimate solution for organizing your Sandisk Extreme Pro USB drives – the Sandisk Extreme Pro USB Cover. Designed with precision using Fusion 360, this sleek and efficient cover is a must-have for tech enthusiasts. Its…
This is just a simple cable holder for a SanDisk portable SSD so I stop losing them in my laptop bag or forgetting them on my desk. It has a compliant spring on the bottom side so it can flex to fit on to the SSD. I printed mine in PETG…
I merged the Sandisk Extreme external SSD mount on the NP-F Battery cover slot remix. I had to widen the Sandisk mount, because my 1TB drive must be a different model number. The original was slightly too small. I also closed part of the…
I created this portable support for my SanDisk clone SSD, as it differs from the original. The holder is secured to smooth surfaces such as desks or PC cases using two robust suction cups. For optimal suction cup attachment, M5 threaded…
I made these for the SanDisk Ultra Dual Drive Luxe USB A C flash drives. The cases will hold up to 3 of them total. Opening for drives is 46 x 13.5 mm and 9 mm deep. External dimensions is 56 mm square and 15 mm tall for rev 2 and 3. I…
🚀 Elevate your Mobile Exo Suit game with the new SanDisk Ixpand Add-on!
A sleeve storage for ssd , usb connection is accessible , printed standing up, with fuzzy setting .
OK, so I'm a dummy. I drew this up in OpenSCAD, then realized I have a different stick when I was finished. Try at your own risk, I DID NOT PRINT AND TEST THIS. I took over the dimensions 1:1 from the original model, so good chance it…
Adapter to fill the gap when using a Sandisk Extreme SSD. There are two versions of this drive from what I know though. I tried to modify another file that was for adapting the T7, but since this has a weird angle, I ended up having to…
I remixed the original design and only added the clip, fixing issues related to the clip
if you ever felt anoyed like me about sandisk's pendrives then my shell for them is perfect solution for you. i scaled it down as much as it was posible so you can put them in usb slots next to each other. it will take you about 10…
I added a keyring hole, grip texture and 4x magnet 4x1 mm.
This model is a stand for the PlayStation VR2 (PSVR2) headset, designed for convenient storage and aesthetic display of the device. The design has been modified to allow mounting on a Skandis board, helping to save space and keep the…
My USB drive latch had been broken so i made a case for drive itself. You need 1 M2*3mm screw with head smaller than 4.5mm. Screw set with this screw type: Aliexpress , Amazon.com , Amazon.de . Version 2: redesigned the case so the USB-c…
simple cable and USB-adapter holder for the Sandisk (SSD, 1TB)
The SanDisk Ultra Dual-Drive Go USB Type-C are a little small to label and easy to misplace. :-) So created a sleeve (case) that provides an area to add a label, either with the slicer or sharpie. Then added a set of clips (holding from 1…
About This Model is made to hold the Space Mouse Wierless von 3dconnexion but should hold similar sized similar mice to. The designe uses the Hooks from @DavidsGotWood witch you can find here…
I designed this USB holder for my IKEA Skådis pegboard. You need to also print the 2 universal pegs that you can find here: Skadis/ SKÅDIS universal peg The reason for a separate peg from the organizers is that it enables you to design…
If you prefer, one suggestion would be to put foam on top. But you can use the printed top.
Here is a 3 part bracket that is simple to print for a sandisk ssd. It fits Ikea Skadis plates.
The SanDisk E61 portable hard drive is very compact, but its data cable and adapter are easy to lose when stored separately. So, I designed this protective case, which not only protects the E61 hard drive but also stores the data cable…
A replacement clip for the Sandisk Sansa Clip Zip MP3 player. Printed vertically in PETG for best strength. Supports needed when printing vertically (no supports needed when printing horizontally, back side on the bed). The hole for the…
Minimal protective shell for SanDisk Cruzer Ultra with a broken case. First you need https://www.printables.com/model/452052-usb-stick-repair-sandisk-cruzer-ultra by Willi, then just slip the cover on. You can add a dab of glue, but it's…
This model is a custom holder designed for the Leatherman Wave Plus multitool, allowing it to be securely mounted on a Skandis board. The holder ensures that the multitool is easily accessible while keeping the workspace organized and…
Comodo organizer per tenere tutto a portata di mano. Convenient organizer to keep everything at hand. Materiale TPU
Simple console for a SanDisk card reader to be mounted under desktop.
There are two version available. I use the snug version as I don't take my drive often, but if you do, try the loose version first.
This is a simple print that holds together the USB-C cable and USB-A adapter that come included with the SanDisk Extreme Pro SSDs. I wanted to keep the two accessories together but other designs were a lot bigger than I wanted. I just…
Die Hermes Wurde ab der Folge Vorstoß zum Uranus genutzt und kam dann sie in vielen nachfolgenden Folgen vor. Das Design rührt von dem Cover Die Vollstrecker Teil 2 und Vorstoß zum Uranus Teil 2 her. für die Magneten werden 5x1m runde…
3D print this Sheath, and with the help of a lock, you can prevent people from using/reading the data inside your Sandisk external SSD. I wouldnt actually recomend this for real security, it was made as a joke, so that you can give to the…
Case for a first-gen Sandisk Sansa Clip. Used as a replacement for the back cover after destroying it to replace the battery. I printed it in clear resin for the aesthetic, but PLA works just fine. I recommend using the finest available…
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
works for the model that looks like this. tested on a 64gb print without supports with usb-c hole facing down like how the stl imports. might be able to skip a brim if you print slow enough and have good enough bed adhesion. insert drive…
Sandisk Cruzer Fit case compatibility with keychain and original cap. Printed in the orientation of the model with supports Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro Rafts: No Supports: Yes Resolution: 0.1 Filament:…
SanDisk portable SSD USB-C port dust cap. This will help keep out dust and lint from ruining the USB-C port of your SSD drive.
SSD holder for SanDisk SSD drives, compatible ONLY with PK1 ProSteamer stands. It mounts on the Aluminium bars and can be positioned at any place. Print in PETG or PLA (matte) You can find the physical product here: ProStreamer SSD Holder…
This is a simple Gridfinity bin to hold an Andis Profoil foil shaver. The specific model I have is the Profoil Lithium Titanium Foil Shaver TS-2, but this will likely work with other similar models. Print with your material of choice, no…
I finally finished my player mod; it's only been a week. The stock battery showed 110 mAh under electronic load, and it lasted 13 hours on a Rockbox. This battery is from a 1000 mAh disposable cigarette(112040 format size), so I wonder…
