IKEA SAMLA Box Wall Hodler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two of those 3d printed parts allow you to hang your IKEA SAMLA box on a wall.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 694
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is an awkward space next to my built-in fridge. The wall is pretty crooked, so putting in a shelf is rather complicated. Nevertheless, the shelves would only hold boxes anyway, so I decided to hang the boxes directly on the wall. I found a few models, but I preferred a single piece per side solution, so I designed my own. I've attached the FreeCAD file, if you wish to modify it.
Two of these 3D-printed parts allow you to hang your IKEA SAMLA box on a wall. The limiting factor regarding added weight is probably the flex of the box. The 3D-printed part is rather solidly attached to the wall, even though I am using tiny screws.
Inspired by
- https://www.printables.com/model/47924-ikea-samla-wall-holder-28cm
- https://www.printables.com/model/47921-ikea-samla-wall-holder-14cm
- https://www.printables.com/model/408869-ikea-samla-wall-mount-5l
- https://www.printables.com/model/534685-ikea-samla-drybox-wall-holder