Vallejo paint holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for 24 17ml (25mm) paint bottles
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 562
- Wydruki
- 6
- Wyświetlenia
- 1993
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed some way of storing my paint bottles better than having them in a plastic box. The holder is designed to use as little filament as possible while still being strong. It's designed to be printed using two 0,6mm or three 0,4mm perimeters which makes it a relatively quick print compared to many other designs. The holes are 25,5mm between the walls
Update: Got a request for a lid for the holder, so i made a really simple lid that holds in place by wrapping a larger sized rubberband around the whole thing(If Armypainter can do it with their wet palettes, so can i) I haven't tested the model because of a current lack of filament, so it is a “print at your own risk” kind of model, but please upload a make of it if you decide to print it and tell me how it fits, i made the rim a bit spacier so it should not be a problem. the cavities are 78mm when the lid is closed, which should make most 17ml bottles fit.
If you are looking for a holder for a bit bigger bottles, then check out my design for 60ml (35mm) bottles
https://www.printables.com/model/765090-paint-holder-for-60ml-35mm-bottles