1 / 2
QIDI XSMART 3 Exhaust Fan to Auxiliary Fan conversion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flip around the 60mm exhaust fan that does very little and turn it into a light duty auxiliary blower fan
- Ocena
- 3 / 5
- Polubienia
- 12
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 462
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (18)Powiązane
Flip around the 60mm exhaust fan that does very little and turn it into a light duty auxiliary blower fan. There is 5mm offset from fan center so make sure it points slightly upward during install. Requires at least 2 additional m3 screws >25mm in length to install.
Recommend ABS/ASA for enclosure. Prints without supports.
