1 / 7
on-target funnel targets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Funnel target for disc shooters. Box mount
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This on-target fixture was designed for the 6-Shot Disc Shooter by uhltimate but can be used with other things.
These are filled with frustration and success. The spin on the disk will deny you a win or accelerate you disk out the back.
Printing
- These are thin wall fixtures.
- Good layer adhesion required
- designed for .4mm at 2mm layer.
- Frames print face down
- Remove the support material from the springs
- Print the cut template
CUTTING the box
Cutting holes could be dangerous. Use caution to avoid personal injury. Certain power tools may be facilitate cutting.
- For this one you will need the template.
- Cut on the lines. knock out the plug and insert the fixture.
The box:
- 3-7mm thick is good.
- Less than 3mm you may need to place the templates in the back to make the space behind the clips closer.
Other models:
on-target bullseye door
on-target spinner target
on-target disc shooter hoop track
Don't Forget Night Mode
Put a flashlight in the box and enjoy illuminated target