1 / 7
on-target funnel targets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funnel target for disc shooters. Box mount
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This on-target fixture was designed for the 6-Shot Disc Shooter by uhltimate but can be used with other things.
These are filled with frustration and success. The spin on the disk will deny you a win or accelerate you disk out the back.
Printing
- These are thin wall fixtures.
- Good layer adhesion required
- designed for .4mm at 2mm layer.
- Frames print face down
- Remove the support material from the springs
- Print the cut template
CUTTING the box
Cutting holes could be dangerous. Use caution to avoid personal injury. Certain power tools may be facilitate cutting.
- For this one you will need the template.
- Cut on the lines. knock out the plug and insert the fixture.
The box:
- 3-7mm thick is good.
- Less than 3mm you may need to place the templates in the back to make the space behind the clips closer.
Other models:
on-target bullseye door
on-target spinner target
on-target disc shooter hoop track
Don't Forget Night Mode
Put a flashlight in the box and enjoy illuminated target