Solid Dragonfly Wings (for Soozafone's Voronoi Dragonfly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted solid wings. The voronoi ones done by @Soozafone were great and these are the same shape, but completely solid.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the wings to be solid for two reasons…
- Solid wings
- Custom wings
If you go with option 1, I suggest printing at 0.1mm-0.12mm layer height, 3-4 perimeter walls, and 7-8 top/bottom layers. You can add ironing or a different top infill pattern for an additional cool factor.
If you go with option 2, you'll need to do a bit of tinkering with the slicer settings. Don't worry though, it's super easy!
Use the following settings:
0.1-0.12mm layer height
4 perimeters
0 top layers
0 bottom layers
20-30 percent infill, any infill pattern! I really liked gyroid, 3D honeycomb, and hex!
The beauty of it is that you can experiment with different infill patterns and percentages. Just mess around with it until you find something you like! Make sure you add your makes and put what type of patterns you chose so you can inspire others.
Huge thanks to Soozafone for all of the wonderful models. If you need the dragonfly body and head, download it here.