1 / 7
Losi Lasernut U4 – fenders / mudguards for rear suspension arms (FreeCAD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
protect the rear suspension & drive shaft from the dirt the front wheels throw up
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mudguards are designed to fit with the original tires. If you need to change something, Fusion001 is your starting point…

Printing
The models are designed to be printed in (ABS–like) resin, find manually supported files attached.
On FDM printers, laying the models down on their flat rear side should give the best results. Use supports (wide(!) pattern spacing) and 100 % infill.
Assembly
You need two M3×16 bolts to replace the shorter original ones.