1 / 4
3/4" NPT to 3/4" Beaded Hose Fittings - Straight and Elbow — zdjęcie 1
1 / 4

3/4" NPT to 3/4" Beaded Hose Fittings - Straight and Elbow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A straight and elbow fitting.

Ocena
0 / 5
Polubienia
13
Pobrania
185
Wydruki
0
Wyświetlenia
666
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Beads (vs barbs) are meant for soft tubing like silicone. Use teflon tape on the threads to get a proper seal! 

I was a bit lazy in designing the straight fitting and scaled the entire part down so that the NPT threads would fit. The hose bead is therefore slightly undersized. But it works just fine.
After knowing the proper scale I needed, I took the time to design the elbow properly to maintain the scale of the the bead.  

I recommend using the print settings in the 3MF files. Orientation, variable layer height, random seams are all important. 

Tagi