1 / 4
3/4" NPT to 3/4" Beaded Hose Fittings - Straight and Elbow — image 1
1 / 4

3/4" NPT to 3/4" Beaded Hose Fittings - Straight and Elbow

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A straight and elbow fitting.

Rating
0 / 5
Likes
13
Downloads
186
Makes
0
Views
674
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Beads (vs barbs) are meant for soft tubing like silicone. Use teflon tape on the threads to get a proper seal! 

I was a bit lazy in designing the straight fitting and scaled the entire part down so that the NPT threads would fit. The hose bead is therefore slightly undersized. But it works just fine.
After knowing the proper scale I needed, I took the time to design the elbow properly to maintain the scale of the the bead.  

I recommend using the print settings in the 3MF files. Orientation, variable layer height, random seams are all important. 

Tags