Metric Nutdrivers - Screwdrivers for nuts!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metric Nutdrivers - Screwdrivers for nuts! Plastic spanners are just fine for model building. I became frustrated…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 457
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Metric Nutdrivers - Screwdrivers for nuts!
Plastic spanners are just fine for model building. I became frustrated trying to find the correct socket to fit a nut from my many sockets most of which I have never used.
Here are my Nutdrivers to fit nuts and bolts ranging from 4mm to 13mm across flats. Just print the ones that you need. I suggest the 5.5mm for M3 bolts, 7mm for M4 bolts, 8mm for M5 bolts and 10mm for M6 bolts.
You may also like to print the 1/4 inch Nutdriver from my Imperial Nutdriver set thing:3834312 to fit metal screwdriver heads. There is also a 1/4 inch key which fits quarter inch drive metal sockets.
Print my Nutdriver Stand to keep your Nutdrivers tidy thing:3834317.
Print in PLA or PETG for good layer adhesion. Do not use ABS which is likely to break up in use.
Print Settings
Printer:
any
Rafts:
No
No
Resolution:
0.20 or 0.25 layer height
50%
Filament: . PLA or PETG
Category: Hand Tools