Metric Nutdrivers - Screwdrivers for nuts!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Metric Nutdrivers - Screwdrivers for nuts! Plastic spanners are just fine for model building. I became frustrated…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 1
- Views
- 457
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Metric Nutdrivers - Screwdrivers for nuts!
Plastic spanners are just fine for model building. I became frustrated trying to find the correct socket to fit a nut from my many sockets most of which I have never used.
Here are my Nutdrivers to fit nuts and bolts ranging from 4mm to 13mm across flats. Just print the ones that you need. I suggest the 5.5mm for M3 bolts, 7mm for M4 bolts, 8mm for M5 bolts and 10mm for M6 bolts.
You may also like to print the 1/4 inch Nutdriver from my Imperial Nutdriver set thing:3834312 to fit metal screwdriver heads. There is also a 1/4 inch key which fits quarter inch drive metal sockets.
Print my Nutdriver Stand to keep your Nutdrivers tidy thing:3834317.
Print in PLA or PETG for good layer adhesion. Do not use ABS which is likely to break up in use.
Print Settings
Printer:
any
Rafts:
No
No
Resolution:
0.20 or 0.25 layer height
50%
Filament: . PLA or PETG
Category: Hand Tools